In our last blog, we gave a few tips for starting your dock installation. In this blog, we’ll go over some
further steps:
further steps:
Step 3: Gather the right tools ahead of time
You don't need much, but you don't want to be missing anything at 8 a.m. on install day:
- Cordless drill with a socket adapter
- Ratchet and the right sockets for your bolts
- A small level (or a calm day to measure to the waterline)
- A 2-inch tube cutter for trimming posts to a uniform height
- Waders if you're in water deeper than about 3 feet
- A helper — seriously, two people make this a morning job
Step 4: Install in the right order
Start with the section that rests on the seawall or shore, then work outward. Set the first standard assembly so two sections can share its stringer brackets, and loosely fasten the section with one hex bolt per side. Walk each next assembly out into the water, set it one section-length from the last one, and float or carry the next section into place. On the final section, position the assembly behind the dock end so there's room for a post cap.
Ramp sections no more than 8 inches per section, and make sure the finished dock sits high enough that waves never wash over it — on a big lake or one with fluctuating water levels, that can mean 2 feet or more. Neighboring docks are a good reference for what works on your lake.
Step 5: Level, tighten, and finish
Once everything is in place, level each section by loosening the bolts on the post clamps — the posts slide easily up and down. Measuring to the waterline on a calm day is often more effective than a level alone. When everything is level, go around and snug every bolt, starting with the stringer brackets. Let the dock settle for a few days, then trim the posts to a uniform height with a tube cutter and push the caps on.
Learn how to Build a Boat Dock!
An easy dock install isn't luck — it's a well-designed dock plus a little preparation. If you need tips on how to build a boat dock that goes in fast and stays put, give our team a call at 855-523-2444 or click here to submit a contact form.

No comments:
Post a Comment